marinelife
07-12-2010, 11:09 AM
Anyone see this:
http://www.aquariumplants.com/AquariumPlants_com_s_Electronic_Co2_Regulator_p/co2.htm
FEATURES:
-fully automatic
-fully electronic
-perfectly accurate (from 4 bubbles per second (240 per minute) down to 1 bubble per 10 seconds. (Count can NEVER vary more than 1/1000th of a second!)
-fully adjustable: you can adjust the "bubbles per second" (or "seconds per bubble") & size of the bubble (very tiny bubbles all the way up to very large bubbles)
-NO bubble counter (you count "the LED light flashes instead of bubbles through a bubble counter)
-NO solenoid (that overheats and eventually fails)
-No needle valve (the "timing of the "bubbles" is fully electronic) -Low voltage (12 volts & only draws .5 amps)
-Built in (internal) check valve
-3 year bumper to bumper warranty
-Yes, it can be controlled with all pH controllers (just like others with a solenoid...just plug it in to your pH controller)
-Available with optional LCD 8 digit resettable counter (has "backup" battery, will not lose it's count)
-Now available: "Just the Box"... Many customers currently have a "very expensive" regulator body, with poor quality needle valves/bubble counters/solenoids, so, we are now offering the "electronic control box" separately to use with your existing reg body. They utilize a 1/4" or 1/8" NPT thread size. (contact us if you wish to send your reg body and have us assemble it and test it for you, this service is currently FREE!)
I will let you know how it goes, Mine should be here this week :)
Marc the Reef DIY man has been using one and loves it.
http://www.aquariumplants.com/AquariumPlants_com_s_Electronic_Co2_Regulator_p/co2.htm
FEATURES:
-fully automatic
-fully electronic
-perfectly accurate (from 4 bubbles per second (240 per minute) down to 1 bubble per 10 seconds. (Count can NEVER vary more than 1/1000th of a second!)
-fully adjustable: you can adjust the "bubbles per second" (or "seconds per bubble") & size of the bubble (very tiny bubbles all the way up to very large bubbles)
-NO bubble counter (you count "the LED light flashes instead of bubbles through a bubble counter)
-NO solenoid (that overheats and eventually fails)
-No needle valve (the "timing of the "bubbles" is fully electronic) -Low voltage (12 volts & only draws .5 amps)
-Built in (internal) check valve
-3 year bumper to bumper warranty
-Yes, it can be controlled with all pH controllers (just like others with a solenoid...just plug it in to your pH controller)
-Available with optional LCD 8 digit resettable counter (has "backup" battery, will not lose it's count)
-Now available: "Just the Box"... Many customers currently have a "very expensive" regulator body, with poor quality needle valves/bubble counters/solenoids, so, we are now offering the "electronic control box" separately to use with your existing reg body. They utilize a 1/4" or 1/8" NPT thread size. (contact us if you wish to send your reg body and have us assemble it and test it for you, this service is currently FREE!)
I will let you know how it goes, Mine should be here this week :)
Marc the Reef DIY man has been using one and loves it.