TechGuy40
05-31-2010, 09:29 PM
So Justin @ Aquatic finally got a PinPoint Nitrate Monitor (thanks for coming over and testing it!!!).
First off, I mix the Rod's with a ration 1:5 with RO water. I fed 9ml (roughly 1.8ml of Rod's Reef) of the solution to the Acans, fish, etc. Tested, fed, waited one hour after the pumps fired back up, and tested again. Results were the same in the display, and sump after feeding. At this point the display had been turned over 12 times anyways.
Before Feeding (9:30PM):
http://img684.imageshack.us/img684/7546/img0270zi.jpg
One hour after feeding (10:30~PM):
http://img202.imageshack.us/img202/2066/img0271o.jpg
The next day (1:00PM):
http://img130.imageshack.us/img130/1562/img0272jd.jpg
First off, I mix the Rod's with a ration 1:5 with RO water. I fed 9ml (roughly 1.8ml of Rod's Reef) of the solution to the Acans, fish, etc. Tested, fed, waited one hour after the pumps fired back up, and tested again. Results were the same in the display, and sump after feeding. At this point the display had been turned over 12 times anyways.
Before Feeding (9:30PM):
http://img684.imageshack.us/img684/7546/img0270zi.jpg
One hour after feeding (10:30~PM):
http://img202.imageshack.us/img202/2066/img0271o.jpg
The next day (1:00PM):
http://img130.imageshack.us/img130/1562/img0272jd.jpg